
Can Codex run on a Raspberry Pi 5?
Not confirmed. Codex’s requirements list Ubuntu and Debian but don’t say whether ARM64 is supported. Check its release downloads before buying a Pi for it.
What Codex needs
From Codex’s own documentation, checked 28 October 2026.
| Operating system | macOS 12+, Ubuntu 20.04+ or Debian 10+, or Windows 11 via WSL2 |
|---|---|
| Memory | 4 GB minimum, 8 GB recommended |
| Processor | The requirements table does not name a processor architecture |
What a Raspberry Pi 5 brings
| Power and running cost | About 2.7 W at idle, so roughly $0.36 a month left on all day at the US average electricity price |
|---|---|
| Good to know | OpenClaw's docs rate a 4 or 8 GB Pi 5 as the best Pi for its gateway, recommend a USB SSD over an SD card, and advise against running local models on a Pi. |
| Left on all day | The lowest power draw here, but it is ARM-based, so some optional tools may lack builds, and it is too slow for local models. |
Local models on a Raspberry Pi 5
OpenClaw’s Raspberry Pi guide says not to run local models on a Pi: “even small models are too slow to be useful.” Use a cloud model. The memory table shows what each model size needs.
Questions
Is a Raspberry Pi 5 enough for Codex?
Not confirmed. Codex’s requirements list Ubuntu and Debian but don’t say whether ARM64 is supported. Check its release downloads before buying a Pi for it.
What does it cost to keep a Raspberry Pi 5 running for Codex?
About 2.7 W at idle, so roughly $0.36 a month left on all day at the US average electricity price. The AI model is usually the bigger monthly cost.
Can Codex use a local model on a Raspberry Pi 5?
OpenClaw’s Raspberry Pi guide says not to run local models on a Pi: “even small models are too slow to be useful.” Use a cloud model.
Other combinations
Codex on An old laptop · An old office PC · An N100 mini PC · A Mac mini · A VPS.
On a Raspberry Pi 5: OpenClaw · Hermes Agent · Claude Code. See every agent and computer.