
Can Hermes Agent run on an N100 mini PC?
Yes. Windows 10/11 and Linux on x86_64 are Tier 1 platforms for Hermes Agent.
What Hermes Agent needs
From Hermes Agent’s own documentation, checked 28 October 2026.
| Tier 1 platforms | macOS on Apple silicon only; Windows 10/11 (x86_64 and ARM64); Linux and WSL2 (x86_64 and ARM64); Docker |
|---|---|
| Intel Macs | The desktop installer reports “not supported on this Mac”; Intel users can install the CLI instead |
| Memory | No RAM minimum published; its README says it runs on a $5 VPS |
What an N100 mini PC brings
| Power and running cost | About 4.8 W at idle, so roughly $0.64 a month left on all day at the US average electricity price |
|---|---|
| Good to know | Notebookcheck measured an Intel N100 mini PC (Minisforum UN100L) at 3.8–9.8 W idle and about 13 W under average load. |
| Left on all day | Small and cheap to leave on, but with no dedicated graphics card a local model would run on the CPU, which Hermes' docs say works but responds more slowly. |
Local models on an N100 mini PC
The budget mini PCs picked here have 8 or 16 GB of memory and no graphics card, so a local model would run on the processor, slowly. 16 GB is the floor for a 14B model. The memory table shows what each model size needs.
Questions
Is an N100 mini PC enough for Hermes Agent?
Yes. Windows 10/11 and Linux on x86_64 are Tier 1 platforms for Hermes Agent.
What does it cost to keep an N100 mini PC running for Hermes Agent?
About 4.8 W at idle, so roughly $0.64 a month left on all day at the US average electricity price. The AI model is usually the bigger monthly cost.
Can Hermes Agent use a local model on an N100 mini PC?
The budget mini PCs picked here have 8 or 16 GB of memory and no graphics card, so a local model would run on the processor, slowly. 16 GB is the floor for a 14B model.
Other combinations
Hermes Agent on An old laptop · An old office PC · A Mac mini · A Raspberry Pi 5 · A VPS.
On an N100 mini PC: OpenClaw · Claude Code · Codex. See every agent and computer.